FIller 2K epoxy filler with light extender for decks. Suitable for levelling large boat surfaces, especially decks.
Wood | Fibreglass | Steel | Aluminium | Fillers | Two-pack | Above the waterline
 |
 |
|
900 ml |
24-36 h at 20°C |
 |
 |
|
Knifing application |
No more than |
 |
 |
| 36-48h at 20°C |
P80 |
Description
FIller
2K epoxy filler with light extender for decks. Suitable for levelling large boat surfaces, especially decks.
Colour
The base is grey, the hardener is blue.
Characteristics
· Very good workability
· Shrinking-free
· Low specific weight
Specific weight (part A): 0,72 ± 0,05 g/ml
Specific weight (part B): 0,98 ± 0,01 g/ml
Specific weight A + B: 0,75 ± 0,05 g/ml
Substrate preparation
Stoppani epoxy primers
Dry sanding with P 280-320 paper
Application
Knifing.
S25005 STOPDECK
S152-GB
Mixing ratio
Volume Weight
S25005 STOPDECK ................................... A 900 ml 870 g
S25006 STOPDECK HARDENER..........B 100 ml 130 g
Pot-life at 20°C: 2 h
N° of knifing: 1+1 of refinish
Solids content by volume A+B 100%
Theoretical coverage A + B : 0,2 m2 for 1lt mixture at 5 mm dry film thickness
Recommended film thickness: no more than 2cm each coat
Interval between coats: 36-48 h
Rises in temperature cause pot-life reduction
Drying
| 10°C |
20°C |
35°C | |
| Sanding after | min. 72h | min. 36h | min. 18h |
TECHNICAL DATA SHEET N° S152-GB
UPDATED 03/2010
All information here included is the result of carefully controlled tests and expresses our best and up to date knowledge. This news is given only as an
information, so the firm cannot be accountable for further results. Furthermore it cannot be used as a contestation related to the use of the described
product. All this is due to the fact that use conditions are not under our control
Epoxy thinner for the spray and brush application of epoxy products.
Filler 1K filler based on synthetic resins. Especially indicated for low film thickness knifing applications on large surfaces. Used for 1K paint processes.
2K epoxy filler for finishing knifing coats. It has a fine grain and can be used for thin knifing coats aimed at closing porosity of epoxy fillers with light extender and at preparing surfaces for Wood | Fibreglass | Steel | Aluminium | Fillers | Two-pack | Above the waterline
2K epoxy filler with low specific weight for high film thickness applications in the yachting sector. It’s useable both above and under the waterline. Its excellent adhesion and flexibility characteristics make it suitable for levelling large surfaces suitably prepared and made of steel, aluminium, fibreglass, carbon fibre and wood. Colour The...
Two-component putty for waterproof and repair small holes, nicks or scratches on glass fibers or gelcoat. The package contains the gelcoat, the hardener and a practical spatula for the application. Neutral white colour, paintable with any paint marina. Convenient for quick repairs on any fiberglass surface. Contains styrene datasheet in the attached...
FIller 2K epoxy filler with light extender for decks. Suitable for levelling large boat surfaces, especially decks.
Wood | Fibreglass | Steel | Aluminium | Fillers | Two-pack | Above the waterline
Idea850 n.1, German Baltic Sea
Caribbea 31 for sale
Crispy 520 on the water
