Cavo inox 19 fili 3 mm

Ronstan RF59 Fairlead Stainless Lined 14mm 9/16"

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance. Impact resistant U.V. stablised Nylon Stainless steel liner  A 14.0 mm B 5 mm C 25.0 mm Peso 17 g

Ronstan RF2330 Stay Adjuster

Channel Type Typically used on dinghies, catamarans and small keelboats    Pin Ø 4.8mm Increment Length 8mm Qty. Adjustment Settings 12  Adjust. Length 87 mm Length 117mm Weight 40 g  

Ronstan RF20100 - single swivel block 20mm

Single block with shackle Pulley Ø20 in UV-resistant acetate on stainless steel ball bearings. UV reinforced nylon cheeks with 316 stainless steel structure for control lines, cunningham, vang on dinghies and catamarans 

Ronstan RF30100

Ronstan RF50100

Ronstan RF51100 AP

Ronstan C-Cleat™ Small

winch Antal W6

one speed resin winch, small and fast models for boats up to 6-7m. is the smallest and lightest in the range, with a glass-fibre resin base and drum and an aluminium central rod. Turn the handle clockwise to engage the single direct gear; the handle turns freely counter-clockwise   Shipped directly from Antal. Availability depends on production times,...

611-1 clutch, single

Flat cam, single, for lines Ø6 -10       box structure in UV-resistant resin with steel reinforcements,  extruded aluminium base,  wear-resistant bronze cam mechanism,  stainless steel aligning bushing.      Shipped directly from Antal. Availability depends on production times, order well in advance!

Stopper Antal V-Cam R814-1

   Shipped directly from Antal. Availability depends on production times, order well in advance!

Drizza/scotta alta tenacità

Radar reflector

Manufactured in light alloy. Provided with head plastic protection. Folding model for easy storage when not required.  dimensions (mm): 215x215x300 weight: 450g reflex surface: 3 m².

Manicotto antimonio

Ronstan RF2331 Stay adjuster Fine tune

Reduces the risk of losing the stay when adjusting rig tension Typically used on dinghies, catamarans and small keelboats   Unique retaining system Fast pin for rapid adjustment 17 offset holes calibrated at 4mm increments  Grade 316 stainless steel Pin diameter 4.8mm Increment Length 4mm Number of Adjustment Settings 17 Adjustment Length 64mm...

Rotaia con cursore