Search on blog

Ampreg 22 Kg. 4,23 (resin + hardener)

Epoxy wet laminating Sistems

¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds
¬ Viscosity optimised for good fabric wet-out and drainage resistance
¬ Good cure progression from ambient only cures
¬ Tough resin matrix giving good laminate mechanical properties
¬ DNV-GL & Lloyds Register Certified formats available
¬ Low Toxicity Hardener Formulations

o Improved Hazard Labelling
o CMR & SVHC** Free
o Reduced Environmental Hazards

¬ Formulated with Gurit LRT (Light Reflective Technology) as standard  

In Stock


Ampreg™ 31 has been optimised for the manufacture of large composite structures using hand layup and vacuum bagging techniques whilst offering improved health and safety. 
The viscosity of Ampreg™ 31 has been optimised for good fabric wet-out whilst maintaining good drainage resistance for application on vertical surfaces. Ampreg™ 31 has been designed to give excellent mechanical and thermal properties from both ambient temperature cures and moderate temperature postcures (50°C). This system is available with the full range of Ampreg™ 3X hardener speeds, from Fast to Extra Slow.  


The unique formulation offers improved health & safety through the careful selection of low toxicity raw materials as well as Light Reflective Technology which in conjunction with a UV light-source can detect droplets as small as 1mm for easy identification of contamination to improve industrial hygiene.


Product Details
8 other products in the same category:

Gurit SP Microfibres

Allow you to create strong structural adhesives. When the microfibres are added to the resin / hardener mixture, they absorb an abundant quantity of product (SP 106); this causes the adhesive to increase its volume and concentration. For vertical applications, colloidal silica must be added, which makes the mixture thixotropic and does not allow dripping....

Price €18.00
In Stock

Gurit SP Glass Bubbles

They are hollow rigid glass spheres. Combined with SP 106 they provide a particularly waterproof grout, ideal for the submerged parts of the boat, where a perfectly smooth surface is not necessary (as due to their nature they are very hard to sand). small package: jar Lt. 5 approximately (kg. 0,3) large package: bag kg. 5 

Price €31.00
In Stock

Gurit SP Microballoons

hollow microspheres of low density phenolic resin; once added to the SP 106 epoxy system, they have the characteristic of increasing their volume by decreasing their specific weight in order to form a light and easy to sand grout. The reddish brown color typical of this inert filler makes it aesthetically ideal for gluing dark woods. small package: jar...

Price €45.00
In Stock

Follow us on Facebook