Non-slip additive based on polypropylene micronized wax with uniform granulometry. Used in addition to all types of 1K and 2K colourless or pigmented paints, it keeps the technical characteristics unaltered and creates a non-slip surface.
Quantity to add:
in weight: 5%
in volume: 12,5%
Application
By brush, roller and spray.
Mixing ratio
Apply the first coat according to the instructions of the desired finish’s technical data sheet.
Add a quantity of 12,5 % by volume or 5% by weight to the desired product.
Apply the second coat after the addition as above
By spraying use spray guns with Ø air cap > 1.4
chromed brass. Fixing plate mm 60x30 external flange ø mm 45 recess ø mm 23 x h mm 36
GRP, aluminum or cold moulded wood marconi cutter, clipper bow, wine glass stern, cruising and excursion versions, traditional shipping included
1K varnish with high gloss and very good weather resistance. Formulated with phenolic resins and Tung oils. This varnish has been enriched with special UV filters helping its resistance to the most severe climatic conditions. The high protection level and flexibility make it especially suitable for finishing boat internal and external surfaces. It is...
25X41 P=10 A=41 B=10 F=25
Plywood radius chine fractional sloop, extended version of Didi 38. Optional bulkhead patterns extra.
Dyneema® Link, 5mm x ID 100mm Suits Series 55 Double & Triple Orbit Blocks™ and Series 70 Single Orbit Blocks™ FEATURES Suits RF55201, RF55301, RF75111. B.L. Basket - 2400kg / 5290lb. B.L. Vertical - 1200kg / 2645lb
Yellow brass RINA validated Compliant with UNI EN ISO 9093-1 1123 ½" Thru-hull connection with hose adaptor Ø18mm D D1 SW Ø36 Ø36 1"½ G P F ½" Ø18 Ø15 H H1 B 65 60 22 weight g. 110 THREAD: G = ISO 228/1 (BS 2779)
2K epoxy filler for finishing knifing coats. It has a fine grain and can be used for thin knifing coats aimed at closing porosity of epoxy fillers with light extender and at preparing surfaces for Wood | Fibreglass | Steel | Aluminium | Fillers | Two-pack | Above the waterline
FIller 2K epoxy filler with light extender for decks. Suitable for levelling large boat surfaces, especially decks. Wood | Fibreglass | Steel | Aluminium | Fillers | Two-pack | Above the waterline
2K epoxy primer. Used for hull protection in the paint processes on steel, wood, zinc-coated steel and gelcoat boats. It can be used on the ships bottom (under the waterline) as well as on topside ( above the waterline). On fibreglass boats it avoids osmosis formation and helps antifouling adhesion. Wood | Fibreglass | Steel | Aluminium | Primers and...
Small coastal cruiser ~ Pretty as a picture ~ Shallow draft to get away from the crowd ~ Extra long berths for tall people ~ Extra long cockpit to sleep under the stars ~ Take her home for the winter ~ Modern full-batten gaff rig ~ Sister to Cape Cutter 19, Cape Henry 21, Cape May 25, Cape Charles 32 & Cape Deseada 36TC ~ Plywood plans for...