Subcategories
2K polyurethane colourant for new boats or wooden structures, overcoatable with 1K or 2K products. It gives the substrate a uniform aspect and, by removing wooden defects (stains, colour differences, etc.), it allows you to obtain the aspect of the most valuable woods with the desired intensity
2K sealing undercoat for dry-on-dry paint processes formulated with polyester resin. Suitable as an undercoat for finishing enamels in the yachting field, to seal and fill surfaces with different degrees of absorption. It can also be used as sealer on epoxy primers, before the topcoat, above the waterline (upper works). Wood | Fibreglass | Steel |...
Semi-gloss two-component polyurethane enamel with textured effect. It has good resistance to atmospheric agents. Particularly suitable in the yachting to mask any imperfections of the support, it is used for surfaces inside boats or for painting decks and superstructures. Semi-gloss white colour packaging: 1 liter (A+B) 4 liters (A+B) Due to the high...
Topcoat 1K varnish formulated with phenolic baked resins and selected Tung oils. The addition of special U.V. filters protects wood from ageing process due to ultraviolet rays. Thanks to its full body, to the film flexibility and to its resistance to the marine environment aggressiveness, it is recommended to use this products for finishing boat...
Due to the high costs of international ADR shipments (dangerous goods), this product is available for standard shipping only in Italy. However, if you want you can ask for a quote...
Topcoat 2K polyurethane thixotropic varnish based on fast drying polyester resin for wood. It allows you to obtain paint processes on wood by a few coats thanks to its high film thickness during the application. It can be used for boat painting above the waterline (upper works). The presence of U.V. filters assures a high weather protection. Wood |...
Filler 1K filler based on synthetic resins. Especially indicated for low film thickness knifing applications on large surfaces. Used for 1K paint processes.
Expansion thinner to make brush application easy and to improve 1K traditional synthetic or polyurethane products Thinners Due to the high costs of international ADR shipments (dangerous goods), this product is available as standard only in Italy. However, if you want you can ask for a quote...
Thinner for spray application of 1K topcoats, fillers, primers, clearcoats and polyurethane enamels. Due to the high costs of international ADR shipments (dangerous goods), this product is available as standard only in Italy. However, if you want you can ask for a quote...
Epoxy thinner for the spray and brush application of epoxy products.
Due to the high costs of international ADR shipments (dangerous goods), this product is available for standard shipping only in Italy. However, if you want you can ask for a quote...
Crispy 520 on the water
Simple Guide to Epoxies
Idea 850 in Poland
