875594 repair kit

Ampreg 22 Kg. 4,23 (resin + hardener)

Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...

Gurit AMIPROᵀᴹ 4,2kg. - multi purpose epoxy resin

Resin Kg 3.15 + Hardener (Fast or Slow) Kg 1.05 AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for gluing, coating, lamination and filling...  derived from the famous SP 106 and reformulated with:...

Stoppani Epoxy High Protection

2K high build epoxy primer. Used for hull protection in paint processes on steel, aluminium and gelcoat boats. It offers a  very good barrier to water and it can be used on the ship’s bottom (under the waterline) as well as on topside (above the waterline). Especially suitable to insulate the filler, it allows to obtain a high protection level with a...

Gelcoat GC 188

isophthalic for quality products; thixotropic and pre-accelerated, no drainage on vertical surfaces,     Standard RAL colours: white 9010, 9016,1013 gray 7040 navy blue 5004 packaged by Nautica Limar in 5kg - 10kg - 25kg drums     At the moment, due to the contingent currency and market fluctuation, it is not possible to have a stable...

Transom Platform 46x51cm - Stainless Steel & wood

- built in STAINLESS STEEL and painted marine wood - with 4 fixing plates on the transom - with or without 3-step ladder - only the ladder is also available - made in Italy    

Rectangular Portlight

Anodized Aluminum with watertight Acrylic glass with casted construction and double-side sealing gasket. Great view range thanks to the flat handle. Maximum bulkhead thickness 27 mm. 

One-burner gas cooker

Stainless steel placed on the galley top, light and compact Complete with thermocouple and pressure lock grid Burners: 1600W   dimensions: 240 x 300 x H130 mm     Also available:pan holder brackets item 1504203  

marine toilet (manual)

Porcelain manual toilet, with a compact design, which allows perfect cleaning. All metal parts and screws are in  STAINLESS STEEL suitable for use in sea water. Prepared for connection both above and below deck. The pump can be mounted either on the right or on the left.      also buy the replacement gasket kit for the hand pump

Plastimo Contest 101 Compass

Ø apparent mm. 100.   Red card with 5 ° white graduation, for sailboats over 9 meters.  Double reading on the cockpit and cab side.  Standard lighting 12-24 V. LED.  Provided with inclinometer.  Flushmount  installation on vertical bulkhead or 10°to 25° inclined surface,  or on the mast (with optional mast kit) 

winch Antal W8

one speed black alu or chromed winch, 1 speed ,small and fast models for boats up to 6-7m. AISI 316 stainless steel central rod, an aluminium base and a black anodized aluminium (AL) or chrome-plated (CH) drum mounted on roller bearings Turn the handle clockwise to engage the single direct gear; the handle turns freely counter-clockwise     Shipped...

Ronstan RF60

Ronstan RF7

Stopper Antal V-Cam 814-2

Double Clutch,  for 8-10 mm, 10-12 mm and 12-14 mm lines       - box-structure in UV-resistant resin with s.steel reinforcements - aluminium base - V-Cam and aligning bushing in Aisi 316 - Completely dismantled for simple maintenance and repairing.   Line retrieval can be achieved with the lever closed.       This model is fifitted with a large V shaped...