Alenu 540
Double sea kayak
Subcategories
Double sea kayak
2K sealing undercoat for dry-on-dry paint processes formulated with polyester resin. Suitable as an undercoat for finishing enamels in the yachting field, to seal and fill surfaces with different degrees of absorption. It can also be used as sealer on epoxy primers, before the topcoat, above the waterline (upper works). Wood | Fibreglass | Steel |...
High Performance Marine Kayak
2K epoxy primer. Used for hull protection in the paint processes on steel, wood, zinc-coated steel and gelcoat boats. It can be used on the ships bottom (under the waterline) as well as on topside ( above the waterline). On fibreglass boats it avoids osmosis formation and helps antifouling adhesion. Wood | Fibreglass | Steel | Aluminium | Primers and...
2K hi-build epoxy filler undercoat. Especially suitable for paint processes where epoxy putty sealing is essential. It can be used above the waterline (upper works). Wood | Fibreglass | Steel | Aluminium | Primers and undercoats | Two-pack | Aerosols | Brush/roller | Above the waterline |
Small pratical open motorboat Derived from Crispy 520 10-40 hp 4T or electric engine Tiller-control or console steering wheel Outboard Easily trailablewith a single-axle trailer For coastal, fishing, water-sport activities support epoxy/plywood hull easy construction from a minimal skill amateur builder
2K high build epoxy primer. Used for hull protection in paint processes on steel, aluminium and gelcoat boats. It offers a very good barrier to water and it can be used on the ship’s bottom (under the waterline) as well as on topside (above the waterline). Especially suitable to insulate the filler, it allows to obtain a high protection level with a...
2K black epoxy coating with a high film thickness. Suitable for metal and concrete surfaces subjected to total immersion in water. Suitable for the yachting field, for painting under the waterline (ships bottom). Steel | Aluminium | Primers and undercoats | Two-pack | Aerosols | Brush/roller | Under the waterline |
1K synthetic undercoat formulated with glyceryl phthalate resins. It can be used above the waterline (upper works), applicable over knifing putties or anticorrosive primers before the topcoats. This product can be over coated only with 1K products.
1K universal primer and intermediate coat formulated with resins based on chlorinated rubber and aluminium pigments. It can be used both on the ships bottom (under the waterline) and as an adherence coat between antifouling products in careening operations or in order to help the antifouling adherence to dried epoxy primers. Wood | Fibreglass | Steel |...
1K anticorrosive primer based on modified alkyd resins. It contains active anticorrosive pigments for iron protection and is suitable as rot-proof wood impregnating agent. It can be used both on the ships bottom (under the waterline) and on upper works (above the waterline). Wood | Steel | Primers and undercoats | Mono-composant | Aerosols |...
Thinner for spray application of 1K topcoats, fillers, primers, clearcoats and polyurethane enamels. Due to the high costs of international ADR shipments (dangerous goods), this product is available as standard only in Italy. However, if you want you can ask for a quote...
Epoxy thinner for the spray and brush application of epoxy products.