on-off pull switch

Two positions: OFF-ON Brass case chromed brass knob Ø mm. 20 Pin mm. 9.5 x 25

LUBER-FINER FP586F fuel filter

Height 4.75 [121mm] Inside Diameter M16 x 1.5-6H Thd. Inside Diameter Bottom M16 x 1.5-6H Thd. Outside Diameter 3.01 [76mm]

Rectangular plate base 90° Ø25

base mm 60x45

Cav 7711 filter cartridge

 For CAV 296 & NAUCO PFG14

Tikino 16

The small and easy to build beach cat   - overall lenght: 5,18 m - hull lenght: 4,81 m - maximum beam: 2,37 m - draft: 0,27 m - design displacement: 275 kg - recommended crew : 2 adults or 1 adults and 2 kids - height from DWL: 7,95 m - sail area: 10,2 m²

Dentex 420

SIT ON TOP KAYAK      Plans in electronic format (pdf) sent by e-mail

Dix 38 - 38 Pilot

Steel/aluminum radius chine   marconi double headsail sloop, swim platform, modern. pilothouse version or conventional trunk cabin deck layout (select version).        

Vickers 45

GRP, cold moulded wood or radius chine aluminum/steel    marconi cutter, poop deck (Vickers 45) and aft cockpit (Vickers 45AC), pilothouse, swim platform, modern.       

Vetus Silenziatore a collo d'oca antisifone

ONLY ITALIAN MARKET

SNODO A T ømm.25

AMPREG 31 KG. 22,68 (resin + hardener)

Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...

Stoppani Sottofondo 912

2K sealing undercoat for dry-on-dry paint processes formulated with polyester resin. Suitable as an undercoat for finishing enamels in the yachting field, to seal and fill surfaces with different degrees of absorption. It can also be used as sealer on epoxy primers, before the topcoat, above the waterline (upper works).    Wood | Fibreglass | Steel |...

Stoppani Epoxy Thinner

Epoxy thinner for the spray and brush application of epoxy products.

DH550 charter / cruising catamaran

catamaran for family cruising and charter   construction radius chine in wood / epoxy     

Cape Cutter 19

Plywood lapstrake (clinker) - CAD      5,80m. Centreplate trailer sailer, gaff or marconi cutter, traditional lapstrake. Includes Mylar bulkhead patterns. Optional: plans + hull and deck skin patterns extra    dwg file available for hull & deck cnc kit. Ask for info and for a quote       dwg file available for hull & deck cnc kit. Ask for info and for...

Didi 26

marine plywood radius chine - CAD    A fast boat for exiting weekends, regattas and short cruises. With different options: mobile or fixed bulb, long or short cockpit, inboard or outboard engine, racing or cruising rig. 1: 1 drawings in Mylar for backbone, bulb and rudder. 1: 1 templates of the optional bulkheads (order the floors first).