Subcategories
C2 / C8 remote control cables for inboard / outboard engine control. Item running out, latest sizes and brands (Ultraflex, TX Morse) still available
1120 1" Grated water intake - Yellow brass A B G 104 55 1" F H H1 25 111 85 D S (cm²) SW 55 15 35 weight kg. 0,700 THREAD: G = ISO 228/1 (BS 2779)
with threaded pins oval section mm. 20 x 25 Stainless steel length f.t. mm. 450 height mm. 50
WATERPROOF RESIN THICKENER - Fine waterproof, white powder, used to thicken the epoxy system- Can be used with Glass Bubbles, Microballoons and Microfibres- Refer to the AMPRO™ datasheet for recommended mixes (in ATTACHMENTS) It is a powder (ventilated silicon) modified with respect to the traditional Colloidal Silica to improve the application...
2K polyurethane colourant for new boats or wooden structures, overcoatable with 1K or 2K products. It gives the substrate a uniform aspect and, by removing wooden defects (stains, colour differences, etc.), it allows you to obtain the aspect of the most valuable woods with the desired intensity
2K sealing undercoat for dry-on-dry paint processes formulated with polyester resin. Suitable as an undercoat for finishing enamels in the yachting field, to seal and fill surfaces with different degrees of absorption. It can also be used as sealer on epoxy primers, before the topcoat, above the waterline (upper works). Wood | Fibreglass | Steel |...
Semi-gloss two-component polyurethane enamel with textured effect. It has good resistance to atmospheric agents. Particularly suitable in the yachting to mask any imperfections of the support, it is used for surfaces inside boats or for painting decks and superstructures. Semi-gloss white colour packaging: 1 liter (A+B) 4 liters (A+B) Due to the high...
Due to the high costs of international ADR shipments (dangerous goods), this product is available for standard shipping only in Italy. However, if you want you can ask for a quote...
Topcoat 2K polyurethane thixotropic varnish based on fast drying polyester resin for wood. It allows you to obtain paint processes on wood by a few coats thanks to its high film thickness during the application. It can be used for boat painting above the waterline (upper works). The presence of U.V. filters assures a high weather protection. Wood |...
Filler 1K filler based on synthetic resins. Especially indicated for low film thickness knifing applications on large surfaces. Used for 1K paint processes.
Expansion thinner to make brush application easy and to improve 1K traditional synthetic or polyurethane products Thinners Due to the high costs of international ADR shipments (dangerous goods), this product is available as standard only in Italy. However, if you want you can ask for a quote...
Thinner for spray application of 1K topcoats, fillers, primers, clearcoats and polyurethane enamels. Due to the high costs of international ADR shipments (dangerous goods), this product is available as standard only in Italy. However, if you want you can ask for a quote...
Epoxy thinner for the spray and brush application of epoxy products.
Idea850 n.1, German Baltic Sea
Caribbea 31 for sale
Crispy 520 on the water
