trasparente per capotina

adjustable marine floodlight

Optical unit with 55 watt halogen lamp Stainless steel - Ø 120 mm - height 120 mm

Oval Handrail 450mm stainless steel

with threaded pins  oval section mm. 20 x 25 Stainless steel length f.t. mm. 450 height mm. 50

POLYFORM F1 BIANCO/BLU

POLYFORM A1

Pavimento antisdruciolo MilleRighe

TMC 1500 submersible bilge pump

dimensions: 164,5xØ120mm capacity: 1500gph prevalence: 3m Ø outlet: 1 1/8" power -  current: 12V - 9A - fus2 12A                             24V - 5A - fuse max 8A

AMPROᵀᴹ Colloidal Silica

 WATERPROOF RESIN THICKENER  - Fine waterproof, white powder, used to thicken the epoxy system- Can be used with Glass Bubbles, Microballoons and Microfibres- Refer to the AMPRO™ datasheet for recommended mixes   (in ATTACHMENTS)  It is a powder (ventilated silicon) modified with respect to the traditional Colloidal Silica to improve the application...

Clipper Stoppani Enamel

the incomparable single-component polyurethane bright enamel on an alkyd base famous  for its easy application and its extraordinary elasticity. The high light fastness and excellent resistance in the marine environment make it particularly suitable for finishing with a single-component cycle in the yachting sector. Suitable for painting above the...

Clipper Stoppani U.V. varnish

Topcoat 1K satin or gòossy varnish, of polyurethane nature. The high light fastness and the excellent resistance in the marine environment  make it especially suitable for a finish with a 1K paint process in the yachting field. Suitable for painting above the waterline (upper works).   Wood |  Varnishes |  Mono-composant |  Aerosols |  Brush/roller |...

Stoppani Epoxy Plus

2K epoxy primer. Used for hull protection in the paint processes on steel, wood, zinc-coated steel and gelcoat boats. It can be used on the ship’s bottom (under the waterline) as well as on topside ( above the waterline). On fibreglass boats it avoids osmosis formation and helps antifouling adhesion.  Wood | Fibreglass | Steel | Aluminium | Primers and...

Stoppani Pasta Mogano 2527

2K polyurethane colourant for new boats or wooden structures, overcoatable with 1K or 2K products. It gives the substrate a uniform aspect and, by removing wooden defects (stains, colour differences, etc.), it allows you to obtain the aspect of the most valuable woods with the desired intensity

Stoppani Resolution Primer

1K universal primer and intermediate coat formulated with resins based on chlorinated rubber and aluminium pigments. It can be used both on the ship’s bottom (under the waterline) and as an adherence coat between antifouling products in careening operations or in order to help the antifouling adherence to dried epoxy primers.   Wood | Fibreglass | Steel |...

Stoppani Anticorrosive 2000

1K anticorrosive primer based on modified alkyd resins. It contains active anticorrosive pigments for iron protection and is suitable as rot-proof wood impregnating agent. It can be used both on the ship’s bottom (under the waterline) and on upper works (above the waterline).  Wood | Steel | Primers and undercoats | Mono-composant | Aerosols |...

Stoppani Plaster Finisher Grey

2K epoxy filler for finishing knifing coats. It has a fine grain and can be used for thin knifing coats aimed at closing porosity of epoxy fillers with light extender and at preparing surfaces for   Wood |  Fibreglass |  Steel |  Aluminium |  Fillers |  Two-pack |  Above the waterline

Stoppani Classic Yacht U.V.

Topcoat 1K varnish formulated with phenolic baked resins and selected Tung oils. The addition of special U.V. filters protects wood from ageing process due to ultraviolet rays. Thanks to its full body, to the film flexibility and to its resistance to the marine environment aggressiveness, it is recommended to use this products for finishing boat...