CURVED GUIDE STOPS 220mm

STAINLESS STEEL With stops and push handle - Stainless steel

bulb 15 W 12 V

Special model suitable for navigational lights, type-appoved, suitable for Osculati's "Utility" lights, as well as Hella, Dhr or Aqua Signal.  Vertical filament 12V - 15W Type BAY15D 

Viadana 52.20 pintle pin Ø8

Ancor EP35 water pump

The EP 35 pumps is a self priming pump suitable for multiple uses with deliveries of 35 Lt./min. The 120 Watt motor allows this pump to use heavily even in continuous service. Pump body Bronze Impeller nitrile (Cod. 2080) Lip seal Connections 1/2” Gas 12 or 24 Volts

Aft Pulpit

AISI 316 stainless steel for sailboats. Consisting of two pieces, right and left. 

streight drop shaped fairlead

chrome plated brass

Rectangular Portlight

Anodized Aluminum with watertight Acrylic glass with casted construction and double-side sealing gasket. Great view range thanks to the flat handle. Maximum bulkhead thickness 27 mm. 

Grillo ritorto perno 4.8mm

ceiling light, inox mm 103

Rotary drive with three positions: OFF ON with manual rotation ON via switch (not supplied, one switch can operate multiple ceiling lights) Complete with 10W 12V bulb - Stainless steel, external Ø mm. 103 

Utility 77 112.5° green navigation light

Type-approved lights for vessels up to 12-m long. RINA type-approval in compliance with the COLREG72 regulations. Recommended for medium size boats, 100% watertight, easy to install. Supplied with lamp sockets and bulbs. Type         112.5° right Granted visibility up to 2 mile

Marine 3 Position Ignition Switch Off/Ign/Ign Start

"COLE HERSEE" Three positions: OFF - Ignition - Ignition and start Spring return from position 3 to 2 Security cylinder with two keys Brass case with high dielectric insulating material Ø mm. 36 Pin Ø mm. 20 length mm. 30

Flush hinge for lockers

in chromed brass dimensions mm: 188 x 40 x 30 fixing hole distance mm: 100

Oval Brass portlights 104x233 mm

Approved Model EC Directive 94/25/CC Chromed

Thru-hull connection ½ with hose adaptor Ø18

Yellow brass RINA validated Compliant with UNI EN ISO 9093-1   1123  ½" Thru-hull connection with hose adaptor Ø18mm D D1 SW Ø36 Ø36 1"½ G P F ½" Ø18 Ø15 H H1 B 65 60 22 weight  g. 110   THREAD: G = ISO 228/1 (BS 2779) 

rigging screw 8mm

Made of mirror polished AISI 316 stainless steel; fine finish, sliding threads, generously sized to provide a strong adjusting travel.

GOLFARE A PONTE INOX MM45