POLYFORM A1

Ancor EP35 water pump

The EP 35 pumps is a self priming pump suitable for multiple uses with deliveries of 35 Lt./min. The 120 Watt motor allows this pump to use heavily even in continuous service. Pump body Bronze Impeller nitrile (Cod. 2080) Lip seal Connections 1/2” Gas 12 or 24 Volts

Old Style Tops Mount Engine Control

engine + inverter double lever control sturdy chromed brass case with fork connections for C2 / C8 / C33 cables

Pavimento antisdruciolo MilleRighe

TMC 1500 submersible bilge pump

dimensions: 164,5xØ120mm capacity: 1500gph prevalence: 3m Ø outlet: 1 1/8" power -  current: 12V - 9A - fus2 12A                             24V - 5A - fuse max 8A

Escapist 24

 Modern-Classic Cruiser    modern hull & building method, classic style, Modernwoodenboat project plans almost ready to complete, you can already order

AMPROᵀᴹ Colloidal Silica

 WATERPROOF RESIN THICKENER  - Fine waterproof, white powder, used to thicken the epoxy system- Can be used with Glass Bubbles, Microballoons and Microfibres- Refer to the AMPRO™ datasheet for recommended mixes   (in ATTACHMENTS)  It is a powder (ventilated silicon) modified with respect to the traditional Colloidal Silica to improve the application...

Clipper Stoppani Enamel

the incomparable single-component polyurethane bright enamel on an alkyd base famous  for its easy application and its  extraordinary elasticity. The high light fastness and excellent resistance in the marine environment make it particularly suitable for finishing with a single-component cycle in the yachting sector. Suitable for painting above the...

Glasstop Stoppani

Topcoat 2K glossy polyurethane topcoat, based on polyester resin. Recommended for painting in the yachting field above the waterline (upper works). It has good mechanical properties and good weather resistance. Wood |  Fibreglass |  Steel |  Aluminium |  Enamels |  Two-pack |  Aerosols |  Brush/roller |  Above the waterline |    Due to the high costs of...

Clipper Stoppani U.V. varnish

Topcoat 1K satin or gòossy varnish, of polyurethane nature. The high light fastness and the excellent resistance in the marine environment  make it especially suitable for a finish with a 1K paint process in the yachting field. Suitable for painting above the waterline (upper works).   Wood |  Varnishes |  Mono-composant |  Aerosols |  Brush/roller |...

Noa Noa Endurance

Hard matrix antifouling suitable to protect both sailing and motor boats. It can be used both in fresh and salt water. The controlled release of active components achieves a good antifouling function, which on fast boats, is renewed by the friction of water on the hull. It is suitable for the protection of fibreglass and composite materials, wood, steel...

Stoppani Epoxy Plus

2K epoxy primer. Used for hull protection in the paint processes on steel, wood, zinc-coated steel and gelcoat boats. It can be used on the ship’s bottom (under the waterline) as well as on topside ( above the waterline). On fibreglass boats it avoids osmosis formation and helps antifouling adhesion.  Wood | Fibreglass | Steel | Aluminium | Primers and...

Stoppani Pasta Mogano 2527

2K polyurethane colourant for new boats or wooden structures, overcoatable with 1K or 2K products. It gives the substrate a uniform aspect and, by removing wooden defects (stains, colour differences, etc.), it allows you to obtain the aspect of the most valuable woods with the desired intensity

Stoppani Teak-Life Cleaner

Sibelius Active Self Polishing

High quality self-polishing antifouling, based on copper and organic substances with synergetic action. Especially suitable for hulls sailing at moderate speed (< 25 knots). The patented binder technology avoids fouling heap over time. The controlled release of active components achieves a perfect long-lasting antifouling function that is renewed by...

Stoppani Fisher Active

Soluble matrix antifouling (CDP technology) to use on boat hulls sailing at moderate speed. Especially suitable for temperate waters. Being a product formulated with copper salts, it is not compatible with aluminium hulls due to the risk of triggering galvanic currents.    Wood |  Fibreglass |  Steel |  Aluminium |  Antifoulings |  Mono-composant |...