Subcategories
C2 / C8 remote control cables for inboard / outboard engine control. Item running out, latest sizes and brands (Ultraflex, TX Morse) still available
Marine use (MA). Racor ISO 10088 water / diesel separator filter. R.I.Na approved. and US COAST GUARD approved. Complete with PARKER-RACOR 2040 cartridge. Fittings excluded. Flow rate: Continuous flow 270 Lt / h - max. 341 Lt / h. Measurements: height 432mm - width 152mm - depth 178mm fittings 22 x 1.5
"Antiskid for decks. In rubber-cork conglomerate. thickness mm. 3, slabs mm. 1200 x 900, diamond surface. Available only:1 piece brown color
1120 1" Grated water intake - Yellow brass A B G 104 55 1" F H H1 25 111 85 D S (cm²) SW 55 15 35 weight kg. 0,700 THREAD: G = ISO 228/1 (BS 2779)
with threaded pins oval section mm. 20 x 25 Stainless steel length f.t. mm. 450 height mm. 50
The EP 35 pumps is a self priming pump suitable for multiple uses with deliveries of 35 Lt./min. The 120 Watt motor allows this pump to use heavily even in continuous service. Pump body Bronze Impeller nitrile (Cod. 2080) Lip seal Connections 1/2” Gas 12 or 24 Volts
Resin Kg 3.15 + Hardener (Fast or Slow) Kg 1.05 AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for gluing, coating, lamination and filling... derived from the famous SP 106 and reformulated with:...
WATERPROOF RESIN THICKENER - Fine waterproof, white powder, used to thicken the epoxy system- Can be used with Glass Bubbles, Microballoons and Microfibres- Refer to the AMPRO™ datasheet for recommended mixes (in ATTACHMENTS) It is a powder (ventilated silicon) modified with respect to the traditional Colloidal Silica to improve the application...
2K polyurethane colourant for new boats or wooden structures, overcoatable with 1K or 2K products. It gives the substrate a uniform aspect and, by removing wooden defects (stains, colour differences, etc.), it allows you to obtain the aspect of the most valuable woods with the desired intensity
Self-polishing antifouling product, based on copper and on organic substances with synergetic action. Especially suitable for boat hulls that are sailing at moderate speed (< 25 knots) and are used very often. The technology used (CDP eroding) avoids fouling heap over time. The controlled release of active components achieves a perfect antifouling...
2K sealing undercoat for dry-on-dry paint processes formulated with polyester resin. Suitable as an undercoat for finishing enamels in the yachting field, to seal and fill surfaces with different degrees of absorption. It can also be used as sealer on epoxy primers, before the topcoat, above the waterline (upper works). Wood | Fibreglass | Steel |...
Semi-gloss two-component polyurethane enamel with textured effect. It has good resistance to atmospheric agents. Particularly suitable in the yachting to mask any imperfections of the support, it is used for surfaces inside boats or for painting decks and superstructures. Semi-gloss white colour packaging: 1 liter (A+B) 4 liters (A+B) Due to the high...
Idea850 n.1, German Baltic Sea
Caribbea 31 for sale
Crispy 520 on the water
