RE201T tessuto e-glass 0/90°

Gurit AMIPROᵀᴹ 4,2kg. - multi purpose epoxy resin

Resin Kg 3.15 + Hardener (Fast or Slow) Kg 1.05 AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for gluing, coating, lamination and filling...  derived from the famous SP 106 and reformulated with:...

RE301H8 e-glass 0/90° fabric

weight: 300g/m², H8satin execution. High quality e-glass fabric, carefully selected and guaranteed by SP Gurit High Modulus® height 1270 mm - cut and price / linear meter (not fractions) Reduced price for quantities ≥ 10 m and ≥ 20 m  

Gurit AMPROᵀᴹ 13kg. - multi purpose epoxy resin

Resin Kg 10,00 Hardener (Fast or Slow) Kg 3,00    Choose the complete package (resin + hardener),  just only the resin or only the hardener     AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for...

RE400T e-glass 0/90° fabric

weight: 390g/m², 2x2 twill execution. High quality e-glass fabric, carefully selected and guaranteed by SP Gurit High Modulus® height 1250 mm - cut and price / linear meter (not fractions) Reduced price for quantities ≥ 10 m and ≥ 20 m  

Gurit AMPROᵀᴹ 26kg. - multi purpose epoxy resin

Resin Kg 20,00  Hardener (Fast or Slow) Kg 6,00    Choose the complete package (resin + hardener), just only the resin or only the hardener      AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for...

AMPROᵀᴹ Colloidal Silica

 WATERPROOF RESIN THICKENER  - Fine waterproof, white powder, used to thicken the epoxy system- Can be used with Glass Bubbles, Microballoons and Microfibres- Refer to the AMPRO™ datasheet for recommended mixes   (in ATTACHMENTS)  It is a powder (ventilated silicon) modified with respect to the traditional Colloidal Silica to improve the application...

Gurit SP Microfibres

Allow you to create strong structural adhesives. When the microfibres are added to the resin / hardener mixture, they absorb an abundant quantity of product (SP 106); this causes the adhesive to increase its volume and concentration. For vertical applications, colloidal silica must be added, which makes the mixture thixotropic and does not allow dripping....

Gurit SP Microballoons

hollow microspheres of low density phenolic resin; once added to the SP 106 epoxy system, they have the characteristic of increasing their volume by decreasing their specific weight in order to form a light and easy to sand grout. The reddish brown color typical of this inert filler makes it aesthetically ideal for gluing dark woods. small package: jar...

Gurit SP Glass Bubbles

They are hollow rigid glass spheres. Combined with SP 106 they provide a particularly waterproof grout, ideal for the submerged parts of the boat, where a perfectly smooth surface is not necessary (as due to their nature they are very hard to sand). small package: jar Lt. 5 approximately (kg. 0,3) large package: bag kg. 5 

Ampreg 22 Kg. 4,23 (resin + hardener)

Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...

AMPREG 31 KG. 22,68 (resin + hardener)

Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...

Gurit Spabond 345

Epoxy Adhesive System   ¬ High strength and toughness ¬ Excellent gap filling properties ¬ Designed for cartridge and mixing machine dispense ¬ Two hardener speeds give a range of working times / clamp times ¬ Low exotherm and shrinkage  ¬ Germanischer Lloyd certified ¬ Lloyds Register certified  

Gurit Spabond™ 5 minute

Fast structural adhesive in cartridge Tacking And Secondary Bond Adhesive    ¬ 5 minute adhesive ¬ Ideal when used as an “extra hand” in assembly ¬ Can be used alongside other Spabond products ¬ Available in double 400ml cartridges  (1:1 resin + hardener)  

Gurit Spabond dispenser