DUDLEY DIX YACHT DESIGN
Cape Charles 32
Lapstrake Plywood
|
TIMBER LIST The following list of materials is approximate and intended for calculation of approximate costs. We offer no guarantees of accuracy. |
| MARINE PLYWOOD 1,22x2,44m (4'x8') (preferably Okoume plywood) 6mm (1/4") - 20 sheets 12mm (1/2") - 52 sheets SAWN PINE (for building stocks etc) 38x38mm (1 1/2"x1 1/2") (braces) - 13m (43') 38x150mm (1 1/2"x6") (rails) - 35m (115') 50x75mm (2"x3") (bulkhead legs) - 33m (108') 100x100mm (4"x4") (posts) - 6m (20') SOLID TIMBER (meranti, mahogany, Douglas fir or similar, selected, free of knots, shakes fractures etc. Sizes are finished sizes. 12x75mm [1/2”x3”] (laminated beams) – 52m [174’] 20x20mm [3/4”x3/4”] (cleats, framing etc.) – 65m [213’] 30x50mm [1.18”x2”] (sheer clamps) – 25m [82’] 32x44mm [1 ¼”x1 ¾”] (hull & deck stringers) – 220m [721’] Deadwood formed from available timber sizes (50-75mm thick) [2-3”] – 0.75cu.m [27cu.ft.] RESIN & GLASS (for coatings and reinforced areas) Epoxy resin (low viscosity 100% solids) - 150Litres (40 US gal) 150mm (6") Wide glass tape - 1 roll 600g/sq.m Biaxial glass fabric - 50sq.m (538sq.ft) |