Prestigious single-component polyurethane finish specific for the nautical sector.
Clipper is the historic Stoppani enamel with unrivaled surface brilliance, excellent resistance to aging and chalking, even in the most critical conditions. Faster drying than traditional synthetic enamels, it has the advantage of dilating even on large surfaces. It is applied on iron, wood and pre-existing suitably treated varnishes.
application and usage:
|
Nozzle diameter : 1,2-1,3 Working pressure (STAND:): 3,5-4 Working pressure (atm): HVLP: 2-2,5
|
|
S70020 Thinner 277 o S70110 Thinner 6209 Thinning 10-20% |
|
on touch: 60' dust-free: 2-3h overcoating: 18h |
|
90 μ |
|
6 m²/liter ( P.s.Kg/Lt= 0,90/1,30) |
Specific weight (part A):
white and derived colours: 1,20 ± 0,1 g/ml
colours:1,00± 0,1 g/ml
Substrate preparation
Stoppani 1K Primers
Dry sanding with P 280-320 paper
Old coatings
Verify the adhesion of the underlying paint process and dry sand with P240-280 paper
Application
By brush, roller or spray with traditional spray gun or HVLP.
Relative humidity < 80%
Spray temperature >10 °C <35°C
Substrate temperature 5 °C >dew point
Mixing ratio
Brush or roller
volume
S30... CLIPPER........................................................................A 1000 parts
S70020 or S70050 DILUENTE 277 or DILATANTE 678......B 100-200 parts
Spray
volume
S30... CLIPPER........................................................................A 1000 parts
S70020 or S70110 DILUENTE 277 or DILUENTE 6209......B 100-250 parts
Ø conventional spray gun and HVLP: 1.2-1.3 mm
Pressure: 3,5 – 4 Atm HVLP: 2 – 2,5 Atm
N° of coats: 2
Recommended film thickness: 80-100µ dry (n° 2 coats by spray of 90 µ wet each)
Minimum interval between coats: 18h by roller/ brush, 60’ by spray, at 20°C
Theoretical coverage mix A : 6 m2
for 1lt mixture at 90µ dry film thickness
Theoretical coverage mix A+B : 5.5 m2
for 1lt mixture at 90µ dry film thickness
Solids content by volume mix A+B: 49,2%
Drying
|
10°C |
20°C |
35°C |
Sanding after |
min. 14 days |
min. 7 days |
min. 72 h |
Overcoat after |
min. 36 h max. 72 h |
min. 18 h max. 36 h |
min. 9 h max. 18 h |
color table (indicative, colors on screen may differ slightly)
the colors in the images are purely indicative and may be slightly different from the true color values due to the different brightness of the screens on PCs, tablets and smartphones.
TECHNICAL DATA SHEET N° S100-GB
UPDATED 05/2019