Rudder Coupling ref. 84572 - Pirelli TF100
Rubber Coupling 6 holes Ø ext. 142mm out of stock: only 1 piece available
rubber coupling type 0
Ø ext. 257mm
out of stock: only 1 piece available
Dimensions Table
Type |
Rubber Block |
Metal Inserts |
|
||||
|
Ø A |
Dimension |
Shape * |
Ø B |
h |
Ø f |
Material |
|
mm |
mm |
|
mm |
mm |
mm |
|
O |
257 |
Ø 56 |
C |
190 |
68 |
20 |
Fe |
* C circular - R recangular - Q square ** with tooth
Performance Table
TYPE |
Twisting Couple |
Cardan |
Axial |
Twisting |
Speed |
|
operating |
max |
|||||
|
daN/m |
daN/m |
° degrees |
± mm |
daN/m |
rpm |
O |
90 |
225 |
2 |
6,5 |
18,0 |
4000 |
Flexible transmission joints are comprised of a pre-stressed hexagonal or octagonal elastic rubber section, with integral metal reinforcements that have fixing screw holes at the apexes
- they have exceptional elastic properties that allow:
• very effective attenuation of cyclic irregularity and peak torque
• a large safety margin and excellent resistance to twisting, thanks to the pre‑stressing
• the ability to accept misalignment that is difficult to find in other joints
- pre-stressing, obtained by wrapping the elastic section with a metal band, guarantees to keep twisting torque values within prudential limits to the benefit of safety and durability
- it’s recommended to remove the metal pre-stressing band only when installation is completed
- the dimensions shown in the table below refer to the conditions of pre-stressing
.
Rubber Coupling 6 holes Ø ext. 142mm out of stock: only 1 piece available
from 10 to 25 HP
transmission shaft joint FIAT 1100 103 D R 4098479 866369 installed on many small marine diesel engines. also sought after for vintage cars. DIMENSIONS: Internal Ø 51,00 mm Ø external 130,00 mm Ø hole center distance: 96,00 mm