rubber cupling type 81743 - Pirelli TF190
rubber coupling type 0 Ø ext. 257mm out of stock: only 1 piece available
Rubber Coupling 6 holes
Ø ext. 142mm
out of stock: only 1 piece available
Dimensions Table
Type |
Rubber Block |
Metal Inserts |
|
||||
|
Ø A |
Dimension |
Shape * |
Ø B |
h |
Ø f |
Material |
|
mm |
mm |
|
mm |
mm |
mm |
|
E |
142 |
Ø 35 |
C |
100 |
46 |
12 |
Al |
* C circular - R rectangular - Q square ** with tooth
Performance Table
TYPE |
Twisting Couple |
Cardan |
Axial |
Twisting |
Speed |
|
operating |
max |
|||||
|
daN/m |
daN/m |
° degrees |
± mm |
daN/m |
rpm |
E |
16 |
40 |
3 |
5 |
2 |
7500 |
Flexible transmission joints is comprised of a pre-stressed hexagonal elastic rubber section, with integral metal reinforcements that have fixing screw holes at the apexes
- It has exceptional elastic properties that allow:
• very effective attenuation of cyclic irregularity and peak torque
• a large safety margin and excellent resistance to twisting, thanks to the pre‑stressing
• the ability to accept misalignment that is difficult to find in other joints
- pre-stressing, obtained by wrapping the elastic section with a metal band, guarantees to keep twisting torque values within prudential limits to the benefit of safety and durability
- it’s recommended to remove the metal pre-stressing band only when installation is completed
- the dimensions shown in the table below refer to the conditions of pre-stressing
.
rubber coupling type 0 Ø ext. 257mm out of stock: only 1 piece available
from 10 to 25 HP
transmission shaft joint FIAT 1100 103 D R 4098479 866369 installed on many small marine diesel engines. also sought after for vintage cars. DIMENSIONS: Internal Ø 51,00 mm Ø external 130,00 mm Ø hole center distance: 96,00 mm