Engine Control Cable C2/C8
C2 / C8 remote control cables for inboard / outboard engine control. Item running out, latest sizes and brands (Ultraflex, TX Morse) still available
Subcategories
C2 / C8 remote control cables for inboard / outboard engine control. Item running out, latest sizes and brands (Ultraflex, TX Morse) still available
1120 1" Grated water intake - Yellow brass A B G 104 55 1" F H H1 25 111 85 D S (cm²) SW 55 15 35 weight kg. 0,700 THREAD: G = ISO 228/1 (BS 2779)
with threaded pins oval section mm. 20 x 25 Stainless steel length f.t. mm. 450 height mm. 50
The EP 35 pumps is a self priming pump suitable for multiple uses with deliveries of 35 Lt./min. The 120 Watt motor allows this pump to use heavily even in continuous service. Pump body Bronze Impeller nitrile (Cod. 2080) Lip seal Connections 1/2” Gas 12 or 24 Volts
engine + inverter double lever control sturdy chromed brass case with fork connections for C2 / C8 / C33 cables
WATERPROOF RESIN THICKENER - Fine waterproof, white powder, used to thicken the epoxy system- Can be used with Glass Bubbles, Microballoons and Microfibres- Refer to the AMPRO™ datasheet for recommended mixes (in ATTACHMENTS) It is a powder (ventilated silicon) modified with respect to the traditional Colloidal Silica to improve the application...
2K polyurethane colourant for new boats or wooden structures, overcoatable with 1K or 2K products. It gives the substrate a uniform aspect and, by removing wooden defects (stains, colour differences, etc.), it allows you to obtain the aspect of the most valuable woods with the desired intensity
2K sealing undercoat for dry-on-dry paint processes formulated with polyester resin. Suitable as an undercoat for finishing enamels in the yachting field, to seal and fill surfaces with different degrees of absorption. It can also be used as sealer on epoxy primers, before the topcoat, above the waterline (upper works). Wood | Fibreglass | Steel |...
Semi-gloss two-component polyurethane enamel with textured effect. It has good resistance to atmospheric agents. Particularly suitable in the yachting to mask any imperfections of the support, it is used for surfaces inside boats or for painting decks and superstructures. Semi-gloss white colour packaging: 1 liter (A+B) 4 liters (A+B) Due to the high...
Topcoat 1K varnish formulated with phenolic baked resins and selected Tung oils. The addition of special U.V. filters protects wood from ageing process due to ultraviolet rays. Thanks to its full body, to the film flexibility and to its resistance to the marine environment aggressiveness, it is recommended to use this products for finishing boat...
Due to the high costs of international ADR shipments (dangerous goods), this product is available for standard shipping only in Italy. However, if you want you can ask for a quote...