Search on blog

Argie 10 CNC Kit

 Pre-cut  shapes on  CNC from  3 sheets of Okoumè 250x122cm for: bulkheads, hull, deck and cockpit.

Veneer parts are not included, more easily available in your  area.

Construction plans are not included
order separately: Argie 10
 

Delivery: approximately 3  weeks from order

The package consists of 1 OBS wooden box cm129x254x10 of about 40kg. A forklift is recommended for unloading, but 2 people can unload it easily by hand. If you prefer  you can pick-up the kit directly from our factory, personally or with your courier.   

€540.00
Quantity
In Stock

help_outline fai una domanda - ask a question
Argie 10 CNC Kit

Argie 10 CNC Kit

I accept privacy policy rules  

Description

  
  ARGIE 10
 


 

  

 The ARGIE 10 can be cut as a complete boat from three sheets of 6mm plywood, including bouyancy compartments fore, aft and amidships as well as rudder and daggerboard. 
 

 

 
 
Rig principles are identical to those of the smaller sister.
 

 
 
 
The ARGIE 10 is intended primarily to be a family funboat but is also suitable for use as a tender on larger yachts. She has greater load carrying capacity and will comfortably sail two adults or three children or row five adults with gear. Again load carrying capacity will vary with water conditions.
 

 

 
 
  
LOA:      3.10m  (10'2")
Beam:  1.35m (4'5")
Sail Area: 5.25m² (56.5)
Hull Weight:  29kg (64lb)
Oar length:  2.0m (6' 6") 
 
 
 

Product Details

Data sheet

okoumè 250x122cm - thickness
6mm
You might also like

Argie 10

"I was commissioned to design a larger sister of Dixi Dinghy for a series feature in the same newspaper. The resulting design is  the ARGIE 10, named after the little boys who sell the newspaper." Dudley Dix. LOA:      3.10m  (10'2")Beam:  1.35m (4'5")Sail Area: 5.25m² (56.5)Hull Weight:  29kg (64lb)Oar length:  2.0m (6' 6")    Plans are usually...

Price €39.00
More
In Stock
12 other products in the same category:

Didi 40 CR CNC Kit

Pre-cut  shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit. Veneer parts are not included, more easily available in your  area. choose between two options: - Hull 12mm - Hull 18mm Construction plans not included Order  separately: Didi 40 CR Page   Delivery: about  4   weeks from order The...

Price €8,900.00
More
In Stock

Didi 950 CNC Kit

Pre-cut shapes on CNC from plywood sheet shapes of Okoumè 250x122cm (see table) for: bulkheads and hull/deck,  cabin and cockpit:  Construction plans not included Order separately: Didi 950 plans   Delivery: about 4 weeks from order The high-volume package consists of 6-8 OSB wooden box of 129x254x50cm, each about 150kg. A forklift is recommended for...

Price €10,800.00
More
In Stock

Paper Jet 14 CNC Kit

Pre-cut shapes on  CNC from 6 plywood sheets of Okoumè 250x122cm for: bulkheads, hull, deck Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes cuts - only okoumè...

Price €980.00
More
In Stock

Cape Henry 21 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. Delivery: about  4   weeks from order The package consists of 4 OSB wooden boxes of 129x254x10cm, each about 150kg. A forklift truck is recommended for unloading but...

Price €6,780.00
More
In Stock

Aerowood 310 CNC Kit

Pre-cut shapes on  CNC from 3 sheets of Okoumè 250x122cm for: bulkheads, hull, deck and cockpit: Veneer parts are not included, more easily available in your  area.If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here.choose between two options:- okoumè sheets with CNC shapes cuts- only okoumè...

Price €390.00
More
In Stock

Cape Charles 32 CNC Kit

Pre-cut shapes on CNC from plywood sheets of  Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. Construction plans not included Order  separately: Cape Charles Page  Delivery: about  4 weeks from order  The high-volume package consists of 8 OSB wooden boxes of...

Price €12,600.00
More
In Stock

Cape Cutter 19 CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads and hull/deck shapes Delivery: about  4   weeks from order The package consists of 3 OSB wooden box of 129x254x10cm, each about 150kg. A forklift is recommended for unloading but 4 people can unload it easily by hand. If you prefer  you can pick-up the kit directly...

Price €6,200.00
More
In Stock

Oppikat/Bigakat CNC Kit

Pre-cut shapes on CN C from sheets of Okoumè 250x122cm (see table) for: bulkheads & amas skin Veneer parts are not included, more easily available in your  area.two options:Oppikat 9' - 2.75mBigakat 12' -  3.72mConstruction plans are not includedorder separately: Oppikat,  Bigakat Delivery: approximately 2  weeks from orderThe high-volume package...

Price €700.00
More
In Stock

Argie 15 CNC Kit

Pre-cut  shapes on  CNC from  8 sheets of Okoumè 250x122cm for: bulkheads, hull and cockpit: Veneer parts are not included, more easily available in your  area. Construction plans are not includedorder separately: Argie 15 plans Delivery: approximately 2  weeks from order The package consists of 1 OSB wooden box cm129x254x10 of about 80kg. A forklift is...

Price €980.00
More
In Stock

Crispy 520 CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck and cockpit: Veneer parts are not included, more easily available in your  area. Construction plans not included Order  separately: Crispy 520 Building Plans Delivery: about  4   weeks from order  The high-volume package consists of 3 OSB wooden box of...

Price €4,450.00
More
In Stock

Didi 34 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads and hull/deck shapes Construction plans not included Order  separately: Didi 34 plans   Delivery: about  4   weeks from order  The high-volume package consists of 5 OBS wooden box of 129x254x50cm, each about 150kg. A forklift is recommended for unloading but 4...

Price €8,950.00
More
In Stock

Didi Sport 15' CNC Kit

Pre-cut shapes on  CNC from 15 plywood sheets of Okoumè 250x122cm for: bulkheads, hull, deck. Veneer parts are not included, more easily available in your  area. Construction plans not included Order  separately: Didi Sport 15 Delivery: about  4 weeks from order The high-volume package consists of 2 OBS wooden box of 129x254x10cm, each about 90kg. A...

Price €2,260.00
More
In Stock

Related articles on blog

Follow us on Facebook