Argie 10 CNC Kit

 Pre-cut  shapes on  CNC from  3 sheets of Okoumè 250x122cm for: bulkheads, hull, deck and cockpit.

Veneer parts are not included, more easily available in your  area.

Construction plans are not included
order separately: Argie 10
 

Delivery: approximately 3  weeks from order

The package consists of 1 OBS wooden box cm129x254x10 of about 40kg. A forklift is recommended for unloading, but 2 people can unload it easily by hand. If you prefer  you can pick-up the kit directly from our factory, personally or with your courier.   

€540.00
Quantity
In Stock

Description

  
  ARGIE 10
 


 

  

 The ARGIE 10 can be cut as a complete boat from three sheets of 6mm plywood, including bouyancy compartments fore, aft and amidships as well as rudder and daggerboard. 
 

 

 
 
Rig principles are identical to those of the smaller sister.
 

 
 
 
The ARGIE 10 is intended primarily to be a family funboat but is also suitable for use as a tender on larger yachts. She has greater load carrying capacity and will comfortably sail two adults or three children or row five adults with gear. Again load carrying capacity will vary with water conditions.
 

 

 
 
  
LOA:      3.10m  (10'2")
Beam:  1.35m (4'5")
Sail Area: 5.25m² (56.5)
Hull Weight:  29kg (64lb)
Oar length:  2.0m (6' 6") 
 
 
 

Product Details

Data sheet

okoumè 250x122cm - thickness
6mm
You might also like

Argie 10

"I was commissioned to design a larger sister of Dixi Dinghy for a series feature in the same newspaper. The resulting design is  the ARGIE 10, named after the little boys who sell the newspaper." Dudley Dix. LOA:      3.10m  (10'2")Beam:  1.35m (4'5")Sail Area: 5.25m² (56.5)Hull Weight:  29kg (64lb)Oar length:  2.0m (6' 6")   pdf file protected: only for...

Price €60.00
More
In Stock

Plywood - Okoumè

Marine plywood with excellent resistance and durability performance in conditions of extreme humidity and salinity. Thanks to their unique water resistance, Okoumè marine plywood panels are the ideal choice for carrying out structural projects that require durability performance in a marine environment even in severe conditions. measures 122x250cm...

Call For Price

More
In stock
12 other products in the same category:

Didi 950 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €10,800.00
More
In Stock

Cape Charles 32 CNC Kit

Pre-cut shapes on CNC from plywood sheets of  Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €11,800.00
More
In Stock

Didi 40 CR CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit. Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €9,200.00
More
In Stock

Aerowood 310 CNC Kit

Pre-cut shapes on  CNC from 3 sheets of Okoumè 250x122cm for: bulkheads, hull, deck and cockpit: Veneer parts are not included, more easily available in your  area.If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here.choose between two options:- okoumè sheets with CNC shapes cuts- only okoumè...

Price €390.00
More
In Stock

Cape Cutter 19 CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull,  deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €5,800.00
More
In Stock

Cape Henry 21 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €5,900.00
More
In Stock

Argie 15 CNC Kit

Pre-cut shapes on  CNC from  8 sheets of Okoumè 250x122cm for: bulkheads, hull and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes cuts - only okoumè...

Price €980.00
More
In Stock

Paper Jet 14 CNC Kit

Pre-cut shapes on  CNC from 6 plywood sheets of Okoumè 250x122cm for: bulkheads, hull, deck Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes cuts - only okoumè...

Price €950.00
More
In Stock

Oppikat CNC kit

Pre-cut shapes on CNC from sheets of Okoumè 250x122cm (see table) for: bulkheads & amas skin Veneer parts are not included, more easily available in your  area.If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here.choose between two options:- okoumè sheets with CNC shapes cuts- only okoumè...

Price €700.00
More
In Stock

Didi 34 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €8,200.00
More
In Stock

Didi Sport 15' CNC Kit

Pre-cut shapes on  CNC from 15 plywood sheets of Okoumè 250x122cm for: bulkheads, hull, deck. Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes cuts - only okoumè...

Price €2,260.00
More
In Stock

Crispy 520 CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes...

Price €4,200.00
More
In Stock

Follow us on Facebook