Argie 15 CNC Kit

Pre-cut  shapes on  CNC from  8 sheets of Okoumè 250x122cm for: bulkheads, hull and cockpit:
Veneer parts are not included, more easily available in your  area.

Construction plans are not included
order separately: Argie 15 plans

Delivery: approximately 2  weeks from order

The package consists of 1 OSB wooden box cm129x254x10 of about 80kg. A forklift is recommended for unloading but 2-4 people can unload it easily by hand. If you prefer  you can pick-up the kit directly from our factory, personally or with your courier.

€980.00
Quantity
In Stock

Description

Hundreds of projects sold, a very high percentage of completed buildings and unexpected qualities of versatility, governability and speed, have made this small, simple but extraordinary sailboat successful:
The Argie 15 has been designed to be a comfortable and safe dinghy  for coastal trips and nautical camping. She is essentially a 3-in-1 boat, to be used under sail, rowing or with a small outboard.

 

L'Argie 15 "Magia", costruito a Venezia da Gianni Trevisanello
The Argie 15 "Magia", built in Venice by Gianni Trevisanello

 
But the Argie 15 has another very important feature: thanks to the simplicity of the construction method and the rationality of its design, its construction is on the skill of many people, even non-experts: the first self-building experience, an avesome free-time work for father and son, a didactic work for middle and professional schools, sports, cultural and recreational clubs etc.

For the more experienced, the Argie 15 standard project is an extraordinary basis for making excellent customizations:

 
 
Three different customizations of deck:
 

la più "corsaiola", ispirata al 420

the "racer", inspired by 420

con la pinna basculante e una raffinata finitura a legno

 with pivoting keel and a fine wood finish

 con gavoni a prua e sulle panche, per il camping nautico

 with pratical lockers in the bow and on side seats, for nautical camping
  

 
Argie 15 has been designed to take full advantage of the use of marine plywood both in the building, for DIY enthusiasts, and in the lightness and strength of this material that allow easy management of the boat in all conditions of use .

Developing the standard plans, the boat will be obtained from 8 sheets of marine plywood (Okoumè 6mm). In all the sheets (2500x1220mm) the pre-cut shapes, holded to the sheet by small tabs of about 10mm that can be removed with a simple jigsaw.
 

arg15ln.gif

 
 
The "Stitch & Glue" method has not many frames like the classic wooden boats building and, with the epoxy resins, allows to create a light but very strong  structure. The weight of the bare hull, without rig and accessories, is about 60kg

 
 

 

20612_001.jpg

 

 L'argie 15 sul carrello

 


Depending on the customization (seats, deck etc.), the fully rigged Argie can reach a weight of 100-120 kg, easily trailed on road with a small trailer.

Thanks to her successful waterlines and despite her appearance of rugged and calm sail dinghy, the Argie 15 revealed unexpected nautical skills, with easy glides starting at great range and the ability to tighten upwind, reaching excellent speeds at any conditions.
 
 

 

 

The large volumes of the hull, the stability of shape and a general balance of the boat that can be used by different users: solo, with a crew of two-three-four people, for sporty sailing, fishing or for a minimum and essential camping - cruising 
 


 

A15Gsail.jpg

 

The mast, sails and deck equipment reflect the whole philosophy of the standard project, based on maximum simplicity and countless options.

 

 

But Argie 15 always continues to amaze: for those not interested in sailing, it can also be built as a basic open boat, with outboard and console .

 

A15frielinghaus1.jpeg

 

A15frielinghaus4.jpeg

 

 

 Carateristics 

 

Loa                                      4.70m
Beam                                  1.83m 
Draft                                     0.13/0.8m 
Sail Area                              9.8 mq 
Weight (only Hull)                60kg 
(without side sets & rig)
Mast height                         6.00m
Power  Max                         7.5kw (10hp)

Product Details

Data sheet

okoumè 250x122cm - thickness
6mm
You might also like

Argie 15

marine plywood - stitch & glue.  One of the most successful designs, with many hulls actually on building. Ideal for nautical camping, sailing schools and coast sailing. Light, fast, safe and balanced, it has great load capacities.  Features Length: 4.70m Width: 1.83 Draft: 0.13 / 0.8m Sails area 9.8 m2 Nude Hull weight: 60kg Mast height: 6.00 m. Max...

Price €60.00
More
In Stock

Plywood - Okoumè

Marine plywood with excellent resistance and durability performance in conditions of extreme humidity and salinity. Thanks to their unique water resistance, Okoumè marine plywood panels are the ideal choice for carrying out structural projects that require durability performance in a marine environment even in severe conditions. measures 122x250cm...

Call For Price

More
In stock
12 other products in the same category:

Didi Sport 15' CNC Kit

Pre-cut shapes on  CNC from 15 plywood sheets of Okoumè 250x122cm for: bulkheads, hull, deck. Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes cuts - only okoumè...

Price €2,260.00
More
In Stock

Paper Jet 14 CNC Kit

Pre-cut shapes on  CNC from 6 plywood sheets of Okoumè 250x122cm for: bulkheads, hull, deck Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes cuts - only okoumè...

Price €950.00
More
In Stock

Oppikat CNC kit

Pre-cut shapes on CNC from sheets of Okoumè 250x122cm (see table) for: bulkheads & amas skin Veneer parts are not included, more easily available in your  area.If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here.choose between two options:- okoumè sheets with CNC shapes cuts- only okoumè...

Price €700.00
More
In Stock

Didi 950 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €10,800.00
More
In Stock

Aerowood 310 CNC Kit

Pre-cut shapes on  CNC from 3 sheets of Okoumè 250x122cm for: bulkheads, hull, deck and cockpit: Veneer parts are not included, more easily available in your  area.If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here.choose between two options:- okoumè sheets with CNC shapes cuts- only okoumè...

Price €390.00
More
In Stock

Cape Charles 32 CNC Kit

Pre-cut shapes on CNC from plywood sheets of  Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €11,800.00
More
In Stock

Argie 10 CNC Kit

 Pre-cut shapes on  CNC from  3 sheets of Okoumè 250x122cm for: bulkheads, hull, deck and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes cuts - only...

Price €540.00
More
In Stock

Didi 40 CR CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit. Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €9,200.00
More
In Stock

Didi 34 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €8,200.00
More
In Stock

Crispy 520 CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC shapes...

Price €4,200.00
More
In Stock

Cape Henry 21 CNC Kit

Pre-cut shapes on CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull, deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €5,900.00
More
In Stock

Cape Cutter 19 CNC Kit

Pre-cut shapes on  CNC from plywood sheets of Okoumè 250x122cm (see table) for: bulkheads, hull,  deck, cabin and cockpit: Veneer parts are not included, more easily available in your  area. If you prefer only marine plywood without CNC cuts but you can't find it in your  area,  you can order it here. choose between two options: - okoumè sheets with CNC...

Price €5,800.00
More
In Stock

Follow us on Facebook