Non-slip additive based on polypropylene micronized wax with uniform granulometry. Used in addition to all types of 1K and 2K colourless or pigmented paints, it keeps the technical characteristics unaltered and creates a non-slip surface.
Quantity to add:
in weight: 5%
in volume: 12,5%
Application
By brush, roller and spray.
Mixing ratio
Apply the first coat according to the instructions of the desired finish’s technical data sheet.
Add a quantity of 12,5 % by volume or 5% by weight to the desired product.
Apply the second coat after the addition as above
By spraying use spray guns with Ø air cap > 1.4
Low friction High static and dynamic load capacity Lightweight
Plywood lapstrake (clinker) m 9.57 Shallow water cruiser, gaff cutter or Marconi cutter, traditional. Includes 1:1 Bulkhead patterns. Optional plans + hull and deck skin patterns extra. dwg file available for hull & deck cnc kit. Ask for info and for a quote
only for the italian market
1/4 -20-UNC
replaced by 978467
fit Racor 900 MA
Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...
Non-slip additive based on polypropylene micronized wax with uniform granulometry. Used in addition to all types of 1K and 2K colourless or pigmented paints, it keeps the technical characteristics unaltered and creates a non-slip surface.
Quantity to add:
in weight: 5%
in volume: 12,5%
Crispy 520 on the water
Simple Guide to Epoxies
Idea 850 in Poland
