Gurit SP Microballoons

hollow microspheres of low density phenolic resin; once added to the SP 106 epoxy system, they have the characteristic of increasing their volume by decreasing their specific weight in order to form a light and easy to sand grout. The reddish brown color typical of this inert filler makes it aesthetically ideal for gluing dark woods. small package: jar...

Oblò ovale ottone cromato

Ampreg 22 Kg. 4,23 (resin + hardener)

Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...

Inspection Hatch ABS 460x525mm

Gurit AMIPROᵀᴹ 4,2kg. - multi purpose epoxy resin

Resin Kg 3.15 + Hardener (Fast or Slow) Kg 1.05 AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for gluing, coating, lamination and filling...  derived from the famous SP 106 and reformulated with:...

Plywood - Okoumè

Marine plywood with excellent resistance and durability performance in conditions of extreme humidity and salinity .      Thanks to their unique water resistance, Okoumè marine plywood panels are the ideal choice for carrying out structural projects that require durability performance in a marine environment even in severe conditions. measures...

Stoppani Plaster 5000 H.P.

2K epoxy filler with high film thickness. Its lightness allows you to shape surfaces without jeopardising the boat’s final weight.  It features excellent adhesion and flexibility and is especially suitable for filling large surface imperfections. Usable in the yacht field both above and under the waterline. Suitable for steel, aluminium, fibreglass...

Stoppani Black Epoxy-Tar Free

2K black epoxy coating with a high film thickness. Suitable for metal and concrete surfaces subjected to total immersion in water. Suitable for the yachting field, for painting under the waterline (ships bottom).  Steel | Aluminium | Primers and undercoats | Two-pack | Aerosols | Brush/roller | Under the waterline |

Stoppani Intermedio Epossidico “R”

2K hi-build epoxy filler undercoat. Especially suitable for paint processes where epoxy putty sealing is essential. It can be used above the waterline (upper works). Wood | Fibreglass | Steel | Aluminium | Primers and undercoats | Two-pack | Aerosols | Brush/roller | Above the waterline |

test

Mikado propeller

For open and pilot workboats, commercial and pleasure. Last 2 sizes available, produced in the 90s. They show signs of aging (stains on the surface) but absolutely  intact and in excellent condition. 

Stoppani Epoxy High Protection

2K high build epoxy primer. Used for hull protection in paint processes on steel, aluminium and gelcoat boats. It offers a  very good barrier to water and it can be used on the ship’s bottom (under the waterline) as well as on topside (above the waterline). Especially suitable to insulate the filler, it allows to obtain a high protection level with a...

Stoppani Plaster SIX

2K epoxy filler with low specific weight for high film thickness applications in the yachting sector. It’s useable both above and under the  waterline. Its excellent adhesion and flexibility characteristics make it suitable for levelling large surfaces suitably prepared and made of steel, aluminium, fibreglass, carbon fibre and wood.    Colour  The...

Fenapol 6157 TA XN

orthophthalic unsaturated polyester resin with low styrene emission, thixotropic and pre-accelerated. Great price! Manual or spray lamination.       packaged by Nautica Limar in drums of 5kg - 10kg - 25 lt. - 225kg    At the moment, due to the contingent currency and market fluctuation, it is not possible to have a stable price. Choose the...

Norester R 172

Low viscosity pre-accelerated thixotropic isophthalic polyester resin. Manual application by brush or spray,   Lloyd's certified.       packaged by Nautica Limar in drums of 5kg - 10kg - 25 lt. 225kg    At the moment, due to the contingent currency and market fluctuation, it is not possible to have a stable price. Choose the options and quantities...

Norester 947

vinylester resin for lamination/infusion/RTM. DCPD formulation (based on dicyclopentadiene)   packaged by Nautica Limar in drums of 5kg - 10kg - 25 lt. - 225kg    At the moment, due to the contingent currency and market fluctuation, it is not possible to have a stable price. Choose the options and quantities you need and click on the "ADD TO QUOTE"...