Gurit SP Microballoons

hollow microspheres of low density phenolic resin; once added to the SP 106 epoxy system, they have the characteristic of increasing their volume by decreasing their specific weight in order to form a light and easy to sand grout. The reddish brown color typical of this inert filler makes it aesthetically ideal for gluing dark woods. small package: jar...

Racor 900 MA

Marine use (MA). Racor ISO 10088 water / diesel separator filter. R.I.Na approved. and US COAST GUARD approved. Complete with PARKER-RACOR 2040 cartridge. Fittings excluded. Flow rate: Continuous flow 270 Lt / h - max. 341 Lt / h. Measurements: height 432mm - width 152mm - depth 178mm fittings 22 x 1.5 

Treadmaster M Original

"Antiskid for decks. In rubber-cork conglomerate. thickness mm. 3, slabs mm. 1200 x 900, diamond surface. Available only:1 piece brown color

Arco Alluminio Anodizzato cm.150 Ø20

Arco Alluminio Anodizzato cm.175 Ø20

Oblò ovale ottone cromato

Ampreg 22 Kg. 4,23 (resin + hardener)

Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...

Ancor PM36 water pump std. 1"

These pumps are made with a footstall and are suitable as engine cooling pumps, bilge pumps, deck washing pumps ,gas-oil transfer  and similar uses. The rubber impeller makes these pumps perfectly selfpriming also. ref. JABSCO 9710-205 ; JOHNSON  F7B-9-10-24070-1

Fuel Portable Tank lt 10

 Portable polypropylene fuel tank, RINa approved 8 mm outlet diameter with integrated filter with level indicator (only 23 lt) size 10lt tank: Length = 330mm; Width = 245mm; Height = 135mm 23lt tank: Length = 440mm; Width = 295mm; Height = 210mm 

rubber cupling type 81743 - Pirelli TF190

rubber coupling type 0  Ø ext. 257mm  out of stock: only 1 piece available

Chromed Brass portlight 75x205 mm

Approved Model EC Directive 94/25/C

Oval Brass portlights 104x233 mm

Approved Model EC Directive 94/25/CC Chromed

Gurit AMIPROᵀᴹ 4,2kg. - multi purpose epoxy resin

Resin Kg 3.15 + Hardener (Fast or Slow) Kg 1.05 AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for gluing, coating, lamination and filling...  derived from the famous SP 106 and reformulated with:...

Stoppani Plaster 5000 H.P.

2K epoxy filler with high film thickness. Its lightness allows you to shape surfaces without jeopardising the boat’s final weight.  It features excellent adhesion and flexibility and is especially suitable for filling large surface imperfections. Usable in the yacht field both above and under the waterline. Suitable for steel, aluminium, fibreglass...

Stoppani Intermedio Epossidico “R”

2K hi-build epoxy filler undercoat. Especially suitable for paint processes where epoxy putty sealing is essential. It can be used above the waterline (upper works). Wood | Fibreglass | Steel | Aluminium | Primers and undercoats | Two-pack | Aerosols | Brush/roller | Above the waterline |

Stoppani Plaster SIX

2K epoxy filler with low specific weight for high film thickness applications in the yachting sector. It’s useable both above and under the  waterline. Its excellent adhesion and flexibility characteristics make it suitable for levelling large surfaces suitably prepared and made of steel, aluminium, fibreglass, carbon fibre and wood.    Colour  The...