Engine Control Cable C2/C8
C2 / C8 remote control cables for inboard / outboard engine control. Item running out, latest sizes and brands (Ultraflex, TX Morse) still available
Subcategories
C2 / C8 remote control cables for inboard / outboard engine control. Item running out, latest sizes and brands (Ultraflex, TX Morse) still available
from 10 to 25 HP
ABS with anodized aluminium bracket and stainless steel base. - WAGNER optical bulb. - Full 360° rotation and elevation joint, frictioning. - Detachable light with 2-m extention cable. - Watertight switch, fitted with rubber cover, integrated into the rear dome. - Equipped with watertight plug for recess or flat mounting. Features: - Weather resistant. -...
with threaded pins oval section mm. 20 x 25 Stainless steel length f.t. mm. 450 height mm. 50
The EP 35 pumps is a self priming pump suitable for multiple uses with deliveries of 35 Lt./min. The 120 Watt motor allows this pump to use heavily even in continuous service. Pump body Bronze Impeller nitrile (Cod. 2080) Lip seal Connections 1/2” Gas 12 or 24 Volts
engine + inverter double lever control sturdy chromed brass case with fork connections for C2 / C8 / C33 cables
WATERPROOF RESIN THICKENER - Fine waterproof, white powder, used to thicken the epoxy system- Can be used with Glass Bubbles, Microballoons and Microfibres- Refer to the AMPRO™ datasheet for recommended mixes (in ATTACHMENTS) It is a powder (ventilated silicon) modified with respect to the traditional Colloidal Silica to improve the application...
2K polyurethane colourant for new boats or wooden structures, overcoatable with 1K or 2K products. It gives the substrate a uniform aspect and, by removing wooden defects (stains, colour differences, etc.), it allows you to obtain the aspect of the most valuable woods with the desired intensity
Self-polishing antifouling product, based on copper and on organic substances with synergetic action. Especially suitable for boat hulls that are sailing at moderate speed (< 25 knots) and are used very often. The technology used (CDP eroding) avoids fouling heap over time. The controlled release of active components achieves a perfect antifouling...
2K sealing undercoat for dry-on-dry paint processes formulated with polyester resin. Suitable as an undercoat for finishing enamels in the yachting field, to seal and fill surfaces with different degrees of absorption. It can also be used as sealer on epoxy primers, before the topcoat, above the waterline (upper works). Wood | Fibreglass | Steel |...
Topcoat 2K polyurethane thixotropic varnish based on fast drying polyester resin for wood. It allows you to obtain paint processes on wood by a few coats thanks to its high film thickness during the application. It can be used for boat painting above the waterline (upper works). The presence of U.V. filters assures a high weather protection. Wood |...