TR HIGH-TEMP MOLD RELEASE

High quality release wax for molds with fiberglass products for high temperaturesA premium paste release for use in higher exothermic applications. Formulated using only the highest quality refined carnauba wax, blended with other high temperature synthetic waxes and additives producing the highest quality mold release wax for the composites market....

trasparente per capotina

Nauco PFG14V Fuel Pre-Filter

fuel prefilter ref. type L UCAS-CAV HD296 The prefilter PFG14V is composed of a head and a transparent polycarbonate cup, complete with a replacement cartridge. The filtering degree is intermediate and can therefore be used with both diesel and petrol. Provided with lower bleed. GAS fittings: 14x1.5 mm. Optimal flow rate 50 lt / h, maximum 150 lt / h....

flexible coupling 7961

transmission shaft joint FIAT 1100 103 D R 4098479 866369 installed on many small marine diesel engines. also sought after for vintage cars. DIMENSIONS: Internal Ø 51,00 mm Ø external 130,00 mm Ø hole center distance: 96,00 mm 

Rudder Coupling ref. 84572 - Pirelli TF100

Rubber Coupling 6 holes Ø ext. 142mm  out of stock: only 1 piece available

Lift and Turn Flush Latch with Cover & padlock holder

Stainless steel size f.t. mm. 100 x 105 Interlocking Ø mm. 80 prof. joint mm. 22

adjustable marine floodlight

Optical unit with 55 watt halogen lamp Stainless steel - Ø 120 mm - height 120 mm

876185-0 VOLVO PENTA Air Filter Insert

Volvo Penta genuine part

Ancor 2125 - Engine Mount M16 - 60IRHD

rubber mount

TMC 1500 submersible bilge pump

dimensions: 164,5xØ120mm capacity: 1500gph prevalence: 3m Ø outlet: 1 1/8" power -  current: 12V - 9A - fus2 12A                             24V - 5A - fuse max 8A

Clipper Stoppani Enamel

the incomparable single-component polyurethane bright enamel on an alkyd base famous  for its easy application and its extraordinary elasticity. The high light fastness and excellent resistance in the marine environment make it particularly suitable for finishing with a single-component cycle in the yachting sector. Suitable for painting above the...

Glasstop Stoppani

Topcoat 2K glossy polyurethane topcoat, based on polyester resin. Recommended for painting in the yachting field above the waterline (upper works). It has good mechanical properties and good weather resistance. Wood |  Fibreglass |  Steel |  Aluminium |  Enamels |  Two-pack |  Aerosols |  Brush/roller |  Above the waterline |    Due to the high costs of...

Noa Noa Endurance

Hard matrix antifouling suitable to protect both sailing and motor boats. It can be used both in fresh and salt water. The controlled release of active components achieves a good antifouling function, which on fast boats, is renewed by the friction of water on the hull. It is suitable for the protection of fibreglass and composite materials, wood, steel...

Stoppani Fisher Active

Soluble matrix antifouling (CDP technology) to use on boat hulls sailing at moderate speed. Especially suitable for temperate waters. Being a product formulated with copper salts, it is not compatible with aluminium hulls due to the risk of triggering galvanic currents.    Wood |  Fibreglass |  Steel |  Aluminium |  Antifoulings |  Mono-composant |...

Stoppani Plaster Finisher Grey

2K epoxy filler for finishing knifing coats. It has a fine grain and can be used for thin knifing coats aimed at closing porosity of epoxy fillers with light extender and at preparing surfaces for   Wood |  Fibreglass |  Steel |  Aluminium |  Fillers |  Two-pack |  Above the waterline

Stoppani Glasstop Clear U.V.

Topcoat 2K polyurethane glossy varnish based on polyester resin. Its elasticity makes it especially suitable for wood painting. Resistant to the marine atmosphere, it is suitable for the finish of mahogany boats and of other valuable woods above the waterline (upper works).Wood |  Varnishes |  Two-pack |  Aerosols |  Brush/roller...