Subcategories
A boat for the little people ~ Modern concept ~ Easy launch and retrieval~ Car-toppable ~ Trainer for the big cat~ Great "my own boat" for the kids~ Now also detailed for wood construction
Marine use (MA). Racor ISO 10088 water / diesel separator filter. R.I.Na approved. and US COAST GUARD approved. Complete with PARKER-RACOR 2040 cartridge. Fittings excluded. Flow rate: Continuous flow 270 Lt / h - max. 341 Lt / h. Measurements: height 432mm - width 152mm - depth 178mm fittings 22 x 1.5
Diesel Engines MD70B, MD70BK, TMD70B, THAMD70B, TAMD70B, AQD70BL, AQD70B
reverse gear oil cooler
Epoxy wet laminating Sistems ¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds ¬ Viscosity optimised for good fabric wet-out and drainage resistance ¬ Good cure progression from ambient only cures ¬ Tough resin matrix giving good laminate mechanical properties ¬ DNV-GL & Lloyds Register Certified formats available ¬ Low...
rubber coupling type 0 Ø ext. 257mm out of stock: only 1 piece available
Approved Model EC Directive 94/25/C
Approved Model EC Directive 94/25/CC Chromed
bigger sister to the Oppikat mixed plywood construction - strip planking dwg file available for hull & deck cnc kit. Ask for info and for a quote
The EP 35 pumps is a self priming pump suitable for multiple uses with deliveries of 35 Lt./min. The 120 Watt motor allows this pump to use heavily even in continuous service. Pump body Bronze Impeller nitrile (Cod. 2080) Lip seal Connections 1/2” Gas 12 or 24 Volts
engine + inverter double lever control sturdy chromed brass case with fork connections for C2 / C8 / C33 cables
Resin Kg 3.15 + Hardener (Fast or Slow) Kg 1.05 AMPRO™ is a multi-use epoxy system by Gurit, awarded for its innovative technical characteristics and for its particular attention to the environment. Simple to use, it can also be used at low temperatures for gluing, coating, lamination and filling... derived from the famous SP 106 and reformulated with:...
2K epoxy filler with high film thickness. Its lightness allows you to shape surfaces without jeopardising the boat’s final weight. It features excellent adhesion and flexibility and is especially suitable for filling large surface imperfections. Usable in the yacht field both above and under the waterline. Suitable for steel, aluminium, fibreglass...
2K black epoxy coating with a high film thickness. Suitable for metal and concrete surfaces subjected to total immersion in water. Suitable for the yachting field, for painting under the waterline (ships bottom). Steel | Aluminium | Primers and undercoats | Two-pack | Aerosols | Brush/roller | Under the waterline |
Crispy 520 on the water
Simple Guide to Epoxies
Idea 850 in Poland
