3mm (1/8") Plate - 57sq.m (614sq.ft) - Deck, anchor locker, tanks, rudder
4mm (5/32") Plate - 32sq.m (345sq.ft) - Hull side skin, transom
5mm (3/16") Plate - 20sq.m (216sq.ft) - Hull bottom skin, intermediate floors
5mm (3/16") Plate (radiused) - 30sq.m (323sq.ft) - Hull radiused skin
6mm (1/4") Plate - 13sq.m (140sq.ft) - Keel, skeg, engine beds, rudder
8mm (5/16") Plate - 3sq.m (33sq.ft) - Floors
20mm (3/4") Plate - 0,35mx3,50m (14"x12' ) - Keel sole
30x6mm (1 1/4x1/4") Flat bar - 29m (96' ) - Tanks
40x6mm (1 1/2x1/4") Flat bar - 123m (404' ) - Frame flanges, deck stringers
40x8mm (1 1/2x5/16") Flat bar - 58m (191' ) - Hull stringers, Transom stiffeners
50x8mm (2x5/16") Flat bar - 95m (312' ) - Hull stringers
75x8mm (3x5/16") Flat bar - 14m (46' ) - Centreline stringer, engine bearers
90x8mm (3 1/2x5/16") Flat bar - 43m (142') - Frames
100x8mm (4x5/16") Flat bar - 5m (17' ) - Chainplate brackets
40x10mm (1 1/2x3/8") 316 S/S Flat bar - 2m (7' ) - Chainplates
50x50x8mm (2x2x5/16") Angle - 36m (119' ) - Deck beams
60mm OD x4,5mm (2 1/2x3/16") wall tube - 6m (20' ) - Keel, skeg, stern tube, rudder
75mm OD x4,5mm (3x3/16") wall tube - 27m (89' ) - Mast support, rubrails
102mm OD x6mm (4x1/4") wall tube - 0,7m (3' ) - Rudder port
33,4mm OD x2,77mm (1 1/4x1/8") wall 316 S/S tube - 27m (89' ) - Sheer tube
60mm diam (2 1/2") 316 S/S bar - 1,4m (5' ) Rudder shaft

Costruzione in Alluminio (5086 o 5083)

4,5mm (3/16") Plate - 57sq.m (614sq.ft) - Deck, anchor locker, tanks, rudder
6mm Plate (1/4") - 52sq.m (560sq.ft) - Hull skin
6mm Plate (1/4") (radiused) - 30sq.m (323sq.ft) - Hull radiused skin
9,5mm (3/8") Plate - 16sq.m (173sq.ft) - Keel, skeg, engine beds, rudder, floors
20mm (3/4") Plate - 0,35mx3,50m (14"x12' ) - Keel sole
32x6mm (1 1/4x1/4") Flat bar - 29m (96' ) - Tanks
40x6mm (1 1/2X1/4") Flat bar - 28m (92' ) - Frame flanges
50x10mm (2X3/8") Flat bar - 72m (237') - Deck beams
50x20mm (2X3/4") Flat bar - 2m (7' ) - Chainplates
100x10mm (4x3/8") Flat bar - 62m (204' ) - Centreline stringer, frames, engine bearers, chainplate brackets
100mm (4") diam Round bar - 3m (10' ) - Rudder shaft
32x32x4,5mm (1 1/4x1 1/4x3/16") Angle or Tee - 153m (502' ) - Hull & deck stringers, transom stiffeners
40x40x4,5mm (1 1/2x1 1/2x3/16") Angle or Tee - 120m (394' ) - Hull stringers
63,5m OD x6,36mm wall (2 1/2x1/4") tube - 4m (14' ) - Keel, skeg, stern tube, rudder
76,2mm OD x6,36mm wall (3x1/4") tube - 27m (89' ) - Mast support, rubrails
130mm OD x5mm wall (5x3/16") tube - 0,7m (3' ) - Rudder port
32mm OD x3,18mm wall (1 1/4x1/8") tube - 27m (89' ) - Sheer tube